Staffing disconnects

A recent research study shows there is a disconnect between what junior staff need and what they’re getting at their firm.

10/31/2017


The initial results from the Consulting-Specifying Engineer 2017 Salary Survey are in, and while the data have not yet been fully analyzed by our research director, some of the responses really jumped out at me.

Two interesting themes rose to the top:

  • Younger staff members do not have the knowledge and abilities they need to do their job well, nor are they getting it on the job.
  • Education is severely lacking, both in the technical and business aspects.

Let me elaborate. By using the U.S. Bureau of Labor Statistics’ format to break down the age of workers, anyone 40 or older is considered “old.” Approximately 76% of survey participants are 40 or older. That leaves a mere 23% younger than 40 and about 1% who prefer not to reveal their age. If you assume those 65 or older (about 21% of respondents) could retire at any time, that’s a huge loss of knowledge.

To compound it more, 58% of respondents do not have a mentoring program at their firm. And about 67% of respondents do not feel that college graduates know the correct technical and practical skills as they enter the workforce. To pile onto the problem, only 34% of survey respondents have indicated they have an official education or training program in place at their firm.

To me, that’s a bit of a disconnect—those who participated in the research study know that younger staff need help, yet their firms do not offer technical or business education.

How are junior staff members supposed to learn on the job? Fortunately, about 67% of respondents personally mentor junior staff members. Both formal and informal mentoring works—studies show that both are effective.

Once again, I challenge you to pick up the ball at your firm and run with it. Take a junior staff member under your wing and help them become the leader of tomorrow.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me