Stacking Up Cable Tray

In the ever-growing world of telecommunications, many factors come to bear when designing a complete and robust cable system—from the type of technology to the level of cable and type of distribution. Often overlooked, however, is the type of cable support or conveyance system, i.e., cable tray and its accessories.

01/01/2004


In the ever-growing world of telecommunications, many factors come to bear when designing a complete and robust cable system—from the type of technology to the level of cable and type of distribution. Often overlooked, however, is the type of cable support or conveyance system, i.e., cable tray and its accessories.

In my experience as a contractor and through conversations with field installers, I've determined that the most common cable tray technologies available are as follows:

Wire basket tray

Pros: From the installer, designer and owner's point of view, this system is becoming the preferred tray for low voltage conveyance. It is easy to install and, as a result, produces lower labor costs compared to other types of tray. Wire basket tray is light and easy to work with in both overhead and underfloor environments and offers several options for attaching to a parallel running wall or for suspension from a permanent structure.

Cons: Oftentimes, the clean cutting tool recommended by the manufacturer still leaves some jagged edges that require additional smoothing with a high-speed grinder or metal file.

Solid-rail ladder rack

Pros: This type of tray is robust in design and excellent for outdoor or harsh environments, such as refineries, manufacturing plants and warehouse areas. It is also effective for high-pair trunk telephone cables. Solid-rail ladder rack has a high NEMA rating and can be installed indoors or outdoors.

Cons: Bends, offsets and radiuses are sometimes difficult to accomplish. Although the tray manufacturer will sell pre-assembled offsets, radiuses and bracketry to accomplish these tasks, field conditions often make it impossible to install, so field fabrication is required.

Because this is a specialty type of tray for either high-voltage cable or high-pair-count trunk-type cables, the price tends to be higher than most other tray systems.

Center spine tray

Pros: Installing center spine trays reduces the number of supports required, as only one is needed for the center spine of the tray. This type of tray is fairly light and is very quick to install if the routes are straight and do not require a lot of up and down offsets or bends.

Cons: Oftentimes with the center spine, one side of the tray gets overloaded with cables causing the tray to list or twist to one side, jeopardizing the integrity of the center support fastening hardware.

U-tray

Pros: U-trays work best when installed along a flat wall, above a ceiling or under a raised floor. Pre-set mounting holes take away guesswork as to where uniform mounting will occur. U-tray is lightweight, inexpensive to install and available in any size.

Cons: If the tray is not through-bolted or securely fastened, the inherent design does not provide for a very secure support. Although it's very easy to bend and offset, the main support bar is often bent before or after initial bends and has a very unaesthetic appearance.



Common cable tray technologies

Wire basket tray

Solid-rail ladder rack

Center spine tray

U-tray



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
June 2018
Chilled-water system design, NFPA 99, Grounded power supply systems
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me