Specifying engineers tasked to spec out electrical counterfeiting

Several strategies give specifying engineers the opportunity to contribute in the fight against electrical counterfeiting by ensuring authentic components are designated and installed.

06/06/2014


Tom Grace. Courtesy: EatonEarlier this year, I asked readers of this blog to share their thoughts on how specifying engineers can play a role in the industry-wide collaboration needed to prevent counterfeit electrical products from making it into facilities.

ARCOM’s Michael A. Heinsdorf has weighed in on the industry-wide issue and recently published his thoughts on the specifying engineer’s role in this collaboration on ARCOM’s blog, Spec Talk. The blog post, titled “Some Suggestions for Preventing Electrical Counterfeiting,” discusses what types of specifications can be made to help thwart electrical counterfeiting.

First, let me point out that Heinsdorf reiterates that while specifying engineers are “not necessarily concerned about electrical counterfeiting, because they assume all equipment is as specified and matches what was included in their project submissions … there is always a chance that specified equipment could be counterfeit.”

From this, Heinsdorf provides six suggestions for specifying engineers on how to incorporate language into MasterSpec in an effort to prevent counterfeit electrical products from unknowingly being used in a project.

For instance, Heinsdorf points out that specifying engineers should “specify systems and assemblies from a single manufacturer” in order to avoid substitutions of “lesser quality” equipment. In addition, engineers are advised to “include provisions for inspection and replacement of any components that fail testing” as a means to eliminate potentially counterfeit products.

These strategies begin to provide specifying engineers with the opportunity to contribute in the fight against electrical counterfeiting by ensuring authentic components are designated and installed.

I encourage you to look for opportunities to include such language in future specifications and keep your eyes open for additional ways we, as professionals, can help prevent counterfeiting. Please contact me once you do at tomagrace@eaton.com. I look forward to continuing the conversation.


As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness, training, and prevention. This involves building awareness of the risks that counterfeit electrical products present to personal safety and the economy with end customers, contractors, inspectors, and electrical resellers.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me