Sounder base series

The B200S sounder base series by is designed to listen to the communication between the attached sensor head and FACP to adopt the same address as the detector, but as a unique device type on the loop.

By System Sensor December 30, 2014

The B200S sounder base series by System Sensor is designed to listen to the communication between the attached sensor head and the fire alarm control panel (FACP) to adopt the same address as the detector, but as a unique device type on the loop. The FACP can then use that address to command an individual sounder—or a group of sounders—to activate. The command set from the panel can be tailored to the specific event, allowing selection of volume, tone, and group. The B200S series employs a separate mounting plate that installs on various junction box sizes to eliminate unsightly surface-mount boxes. The mounting plate enables pre-wiring of all connections to speed and simplify installation. 

System Sensor

www.systemsensor.com