Solar Technology Breakthrough

Solar cells have been unable to make use of the sun’s entire radiation spectrum, but this may change. An accidental discovery has researchers hoping that they can break the “band gap” barrier to development a new generation of photovoltaic cells with greatly increased efficiency.

12/20/2002


Until now, solar cells have been unable to make use of the sun’s entire radiation spectrum, but this may change. An accidental discovery at the Lawrence Berkeley National Laboratory has researchers hoping that they can break the “band gap” barrier to development a new generation of photovoltaic cells with greatly increased efficiency.

Band-gap energy (BGE) is the amount of energy needed to free an electron from its atom. Existing solar cells can only capture sunlight at energies equal to or greater than their BGE. While studying the properties of light-emitting diodes, LBNL researchers discovered that the BGE of indium nitride was much lower than expected—0.7 electron volts, instead of the anticipated 2.0.

Unlike cells currently in use, those made with indium nitride could capture low-frequency red or near-infrared light. Researchers hope to make cells from several layers of varying alloys of indium, gallium and nitrogen. They believe that it would be possible to create inexpensive two-layer solar cells with a 50% efficiency for sunlight to electricity conversion. Multi-layered cells might conceivably attain 70% efficiency. In comparison, existing cells only achieve about 33% efficiency.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me