Six engineering trends in the lighting industry

In July 2014, Consulting-Specifying Engineer surveyed its audience members responsible for decisions related to the design of lighting and lighting control products within their organizations. The 2014 Lighting and Lighting Controls study asked key questions on specifying lighting and lighting controls, including annual revenue, products specified, and challenges engineers are facing.

09/22/2014


Top 5 lighting products specifiedConsulting-Specifying Engineer survey respondents identified these six most important high-level findings impacting the lighting and lighting controls industries today:

1. Total annual revenue: The average annual mechanical, electrical, plumbing, and fire protection revenue was $7.3 million, 8% of which was generated through lighting and lighting control products specified for new and existing buildings (about $0.6 million).

2. Specification involvement: The number of engineers who are responsible for the research of new lighting, lighting equipment, or lighting controls has increased from 74% in 2013 to 81%. Also, more engineers are involved in recommending and selecting brands to be used in projects (up 9% and 7%, respectively, from 2013).

3. Products specified: More than half of respondents to the 2014 survey specify LEDs; T5, T8, or T12 lamps (any size); lighting controls; compact fluorescent lamps (CFLs); and high-intensity discharge lamps (HIDs). However, the specifications of CFLs and HIDs have decreased since 2013 (down 8% and 12%, respectively).

4. Recent changes: When asked about the changes in lighting design or lighting products that have affected them in the past 12 to 18 months, 69% of respondents said LEDs have heavily affected their work, while 62% said energy efficiency and consumption and another 43% said codes and standards.

5. Future challenges: When asked about the future of lighting design, 31% of respondents mentioned challenges related to energy conservation or efficiency; 25% talked about complying with new and changing codes, standards, and regulations; and another 25% referred to LED quality or integration.

6. Design factors: 97% of engineers ranked product quality and product energy efficiency at the top of their list when selecting one lighting product over another. Nine out of 10 engineers also said initial product cost, manufacturer’s reputation, and warranty are equally important.

Access the full 2014 Lighting and Lighting Controls report to view additional key trends and findings at www.csemag.com/2014LightingStudy

 



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
August 2018
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me