Setty: DCPS, Dunbar High School Modernization

New construction at an educational facility.


Geothermal. Courtesy: SettyEngineering firm: Setty
2014 MEP Giants rank: 76
Project: DCPS, Dunbar High School Modernization
Address: Washington, D.C., U.S.
Building type: Educational facility
Project type: New construction
Engineering services: Automation/controls, electrical/power, fire/life safety, HVAC/mechanical, lighting, energy/sustainability, plumbing/piping, and other
Project timeline: 4/1/2010 to 3/31/2013
MEP/FP budget: $1,314,684

Front of High School. Courtesy: SettyChallenges

During design it was determined that there was not enough land area to accommodate 365 wells unless the existing school was completely demolished. This was not a viable option until the construction of the new school was fully completed. This posed a problem because there was no temporary facility adequate to house the students while the new school was being constructed. Also, permitting of the geothermal well field via the DC Department of the Environment (DDOE) was an extremely slow process.


As a result of these challenges Setty decided to split the geothermal well field into two phases, each with its own vault and distribution piping network. The first phase would encompass 166 wells, while the second phase would account Mix Pictures. Courtesy: Settyfor the remaining 199 wells. To further complicate matters, an old fuel oil storage tank that had leaked and contaminated a portion of the soil was discovered in the second phase. This development created more delays in the permitting process. Meanwhile, to get the new building ready for occupancy, phase 1 of the well field could not carry the full building load. So Setty designed a plate and frame heat exchanger, and valved and capped connections to allow for a temporary cooling tower during summer and a hot water boiler during winter and associated pumps that would be just enough to supplement the load for the Academic Wing. This allowed phase 1 of the geothermal well field to accommodate the rest of the building, which included the Administration Wing and the Multipurpose Wing. After further cost evaluation by the Dept. of General Services, it was determined that the heat exchanger and associated pumps were cost prohibitive. As a result, the design team decided that the only way it could operate the new building on a partial well field was to initiate load shedding of various parts of the building throughout the day. Units serving the Academic Wing would be brought online for a few hours while units serving the Multipurpose Wing would alternate run times. This approach was implemented and worked very well. The existing Dunbar High School has since been completely demolished, and phase 2 of the geothermal well field was completed in March 2013. Despite challenging obstacles, the project moved forward and the teachers, students, and community consider the new Dunbar High School a complete success.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me