San Francisco approves a tough green building standard

Legislation will set the standard for newly constructed residential and commercial buildings within the city, as well as building renovations.

09/03/2008


San Francisco Mayor Gavin Newsom approved a green building ordinance in early August that imposes strict requirements on newly constructed residential and commercial buildings within the city, as well as building renovations.

For commercial buildings and high-rise residential buildings, the ordinance adds in requirements from the U.S. Green Building Council's LEED (Leadership in Energy and Environmental Design) rating system. Starting in November (if the California Energy Commission has approved the legislation), new permit applications for high-rise residential buildings must include documentation to achieve LEED certification (or 50 GreenPoints), and starting in 2010, they must include documentation to achieve LEED Silver certification (or 75 GreenPoints). A number of specific LEED standards must also be met for landscaping, water use reduction, and construction debris management. Mid-size commercial buildings don't need to meet LEED certification requirements but must meet LEED standards for building commissioning, landscaping, water use, and construction debris management starting in 2009, and must meet enhanced commissioning standards and tighter water use requirements starting in 2010. Beginning in 2012, the buildings must also meet LEED standards for the use of on-site renewable energy or the purchase of renewable energy credits.

The toughest requirements apply to large commercial buildings. Starting in November, new permit applications for high-rise residential building must submit documentation to achieve LEED certification, and that requirement ratchets up to LEED Silver in 2009 and LEED Gold in 2012. There are also requirements to meet additional LEED standards, nearly equal to those for mid-size commercial buildings.

Finally, for new large commercial interiors and major alterations to existing buildings, new permit applications must include documentation to achieve the same LEED rating requirements as for new large commercial buildings, and must also meet the LEED standards for materials that emit low levels of indoor pollutants. All new buildings must earn additional rating points if an older building was demolished to make room for it, and they must earn even higher points if the demolished building was historical. Building projects can also earn extra points by retaining historical features of the previous building.

For homes, the ordinance requires ratings from the GreenPoints rating system, developed by a non-profit organization called Build It Green . Starting next year, new "small" residential buildings (those with four dwellings or fewer) must achieve 25 GreenPoints (equal to the "Elements" rating), but do not need to be rated. For 2010 and 2011, the homes must be GreenPoint Rated and building applications must demonstrate that a minimum of 50 GreenPoints (equal to the "Whole House" rating) will be achieved. And starting in 2012, building applications for new homes must demonstrate that at least 75 GreenPoints will be achieved. The same rules apply for mid-size residential buildings, except that the requirement for 75 GreenPoints starts earlier, in 2011.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me