Safe Solutions for High-Rise Buildings Require Long-Term Planning


By Claude Hollyfield, DAHC, Director of Training, YSG Door Security Consultants

Close your eyes. Can you locate the nearest fire exit in your building? If not, imagine the similar darkness you would experience if your building became engulfed with smoke during a fire.

Occupant safety in high-rise buildings depends on being able to quickly exit into stairwells and gain access to other safe floors. While it would seem the obvious solution, completely vacating a high-rise is simply not practical - leaving high-rise safety dependent on finding safe refuge elsewhere in the building.

As recent high-rise tragedies have illustrated, moving away from a gauntlet of flame, smoke or heat doesn't always ensure the safety of those in distress. All too often, those fleeing for safety encounter a host of roadblocks unrelated to fire itself, but devastating nonetheless in the final outcome.

Chicago High-Rise Fire
On October 16, 2003, a fire in the 12th-floor supply room of the Cook County Administration Building in Chicago killed six people. The cause of the fire in the 37-story Loop building remains under investigation, but several facts are undisputed:

• All six victims died of smoke inhalation after being trapped in the upper floors of a stairwell behind doors that locked automatically.
• Stairwell doors in high-rises were locked as a security measure.
• Security measures conflicted with fire safety and evacuation plans.
• Firefighters were delayed in gaining access to all floors.

During the evacuation of the upper floors of the Cook County-owned building, a public-address announcement to the building's 2,500 government workers called for an evacuation of the upper floors, according to survivors. The evacuation was initially described as smooth and orderly, but by the time the descending occupants reached the 12th floor, they encountered thick, black smoke, as well as a stream of occupants heading up the stairwell. But because all stairwell doors were locked on the stairwell side as a security measure, no one could re-enter a higher floor.

Survivors have reported that in the time it took them to climb back up to a higher floor, they were overcome by the smoke. Some survivors were eventually rescued onto a floor unaffected by the fire, but it was too late for the six people who died of smoke inhalation in the stairwell.

Safe Solutions Needed
Simply put, safe solutions are paramount to ensure occupant safety in any fire. As the tragic high-rise fire in Chicago demonstrates, something as simple as an unlocked door or a locking system that automatically opens in an emergency could have prevented the deaths. However, high-rise buildings built before 1975, including the Cook County Administration Building, were not required to comply with current codes, and are exempt from National Fire Protection Association (NFPA) codes that mandate newer, more practical solutions to reduce the burden of fire and fire-related hazards.

According to current NFPA codes on stairwell locking systems, "Every stair enclosure door shall allow re-entry from the stair enclosure to the interior of the building, or an automatic release shall be provided to unlock all stair enclosure doors to allow re-entry. Such automatic release shall be activated with the initiation of the building fire alarm system."

Increasingly, code officials and design professionals are becoming more aware of the lethal potential of older buildings that do not comply with the solutions currently outlined by NFPA. Three weeks after the Chicago fire, the Chicago City Council passed an ordinance that relied heavily on NFPA codes, thus eliminating the exemption and immediately impacting every high-rise within the city limits.

The Chicago Ordinance
The City of Chicago ordinance requires every high-rise stairwell enclosure that serves more than four stories to comply with one of two minimum standards by January 1, 2005:

• Unlock the doors - The stairwell enclosure doors cannot be locked from the stairwell side at any time in order to provide re-entry from the stairwell enclosure to the interior of the building; or
• Automatic unlocking - The stairwell enclosure doors must be equipped with a fail-safe electronic lock release system that is activated both manually (by a single switch accessible to building management and emergency personnel) and automatically (by approved smoke detectors connected to a communications panel).

In the interim, the city ordinance also requires the following measures for high-rise buildings:

• Stairwell doors can only be locked on every fourth level.
• Re-entry to the building interior must be possible at all times on the highest story or the second highest story, whichever allows access to another exit stair.
• Doors allowing re-entry must be identified on the stair side of the door.
• Doors not allowing re-entry must include signage on the stair side indicating the location of the nearest door, in each direction of travel, which allows re-entry or exit.

These conditions are part of the newer version of NFPA-101 and indicate how the codes have evolved since 1975. By adopting this ordinance, the City of Chicago is basically trying to comply with today's code. The ordinance, as written, however, will cost high-rise building owners and managers thousands of dollars to comply.

Door Hardware Solutions
The door hardware industry offers several solutions to code requirements, ranging from basic to complex:

• Simple passage set - Passage set hardware is always unlocked, much like common hardware devices found throughout any office buildings. These sets cannot be locked and serve only to latch the door.
• Electric locking devices - These fail-safe locking devices are designed to release automatically when the building alarm system is activated in an emergency. In addition, the devices include a manual release at the building's central fire panel. Electric locking devices include mortise locks, cylindrical locks, and exit devices.
• Electromagnetic lock - Although the Chicago ordinance specifically prohibits electromagnetic locks as an option, this fail-safe locking device is made up of an electromagnet on the doorframe and an armature plate on the door. When power is applied to the electromagnet, the strength of the electromagnet keeps the door locked. In the event of an emergency, the central fire panel de-activates the magnet, allowing the door to be opened. Electromagnetic locking devices provide a good solution in existing buildings because of their ease of installation, and cities elsewhere in the country should consider the devices as a viable option.
• This balance between safety and security is a primary concern of building owners and tenants, who require tight security. However, security issues must be balanced against occupant safety and the ability to gain quick access to safe floors in the event of a high-rise emergency.

Cost, of course, enters as a key concern for building owners and managers. But while more money may translate into higher security, it doesn't necessarily increase safety. The goal is to develop an approach that keeps safety constant - and within local codes - while outfitting stairwell doors with devices that ensure the desired degree of building security.

As the Chicago fire illustrated, the real issue is mandating if, when and how buildings should be required to comply with current codes. This should be a multi-year approach that considers rational solutions and recognizes the costs and time required to ensure a safe and secure building. By adopting a multi-year approach that outlines a clear path to solution, buildings will become safer and more secure each year.

In the case of the Chicago fire, as well as other cities grappling with this issue, the ultimate solution is to abide by the correct local codes. The mandates from the Chicago City Council are likely to serve as a wake-up call to every city in the country with high-rise buildings. Hopefully, local governments from New York to Los Angeles and beyond will unlock the solution to balance safety and security in high-rise buildings - before the next tragedy strikes.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
August 2018
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me