RTM Engineering Consultants LLC: JCFS Abe and Ida Cooper Center

Electrical, power; fire, life safety; HVAC, mechanical; energy, sustainability; plumbing, piping.


Engineering firm: RTM Engineering Consultants LLC

2016 MEP Giants rank: 94

Project: JCFS Abe and Ida Cooper Center

Location: Chicago

Building type: Educational facility

Project type: New construction

Engineering services: Electrical, power; fire, life safety; HVAC, mechanical; energy, sustainability; plumbing, piping

Project timeline: October 2015 to May 2016

MEP/FP budget: $39,000

The Abe & Ida Cooper Center features an indoor play area, offices, classrooms, and additional support spaces. Courtesy: RTM Engineering Consultants LLC


RTM Engineering Consultants partnered with OKW Architects in the design for the Abe and Ida Cooper Center located in Chicago. RTM provided mechanical, electrical, plumbing, and fire protection (MEP/FP) design for the 18,500-sq-ft family services facility that features an indoor play area for children, offices for therapists and other qualified personnel, classrooms, and additional staff and support spaces, such as pantries, lounge areas, and storage areas. To streamline the construction process and provide in-depth coordination of all of the ductwork, pipework, and equipment, RTM used Revit to create 3-D models of the MEP/FP systems for the building.

As a nonprofit and potential LEED Gold project, the Abe and Ida Cooper Center is eligible for funding from the Illinois Clean Energy Foundation, which offers several grant opportunities for designs that achieve a significant increase in energy efficiency when compared with a baseline system, use renewable sources as a means of building energy supply, and are built in a sustainable manner.

In addition to the complexities of designing to LEED Gold standards, RTM faced several challenges in terms of designing the MEP systems to the outlined criteria while staying within the client's budget. Such challenges included minimizing the amount of ductwork while maintaining the acoustical isolation of the office spaces.


RTM worked carefully with the client to provide inventive solutions so the project meets the needs of the facility, stays within budget, and is on track to achieve LEED Gold status. As a nonprofit and potential LEED Gold project, RTM's MEP design addressed the following grants:

  • Innovative HVAC: By implementing an innovative HVAC system, the project is eligible to achieve one-third of the cost difference between the innovative system and the standard Illinois code-minimum system for this type of application. RTM's design involved a variable-flow refrigerant (VRF) system, which meets the foundation's requirements for an innovative system. To help obtain the funding, the team produced an energy model showing that the new VRF system is 20% more efficient than the baseline system defined by the current energy code.
  • Design and commissioning: To achieve the $75,000 funding under this grant as a LEED Gold project, the design must meet minimum energy-performance requirements per the U.S Green Building Council and exceed the Illinois Energy Code requirements. A commissioning plan also must be provided. RTM worked with a commissioning consultant to create and implement this plan.
  • Renewable energy: If this project uses renewable energy to provide a minimum of 9% of the total building energy usage, then funding under this grant can be obtained. RTM's design included the use of PV panels as a renewable energy source to provide electricity for the building.

RTM implemented several design measures in conjunction with the aforementioned renewable energy and energy efficiency requirements. These measures included:

  • A significant reduction in the building's water usage
  • Providing lighting controls to maximize daylight in the building
  • Providing temperature controls in each zone so as to maximize individual heating and cooling control
  • Providing systems and equipment that will track the building's energy use so that any building inefficiencies can be identified and corrected.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me