RFID: The Next Big Thing?

Radio frequency identification (RFID) tags are tiny devices that consist of silicon chips and an antenna that can transmit data to a wireless receiver. You may recognize the technology in your "Speedpass." But one A/E industry consultant thinks the chip may be the next big thing in intelligent building design.

01/01/2004


Radio frequency identification (RFID) tags are tiny devices that consist of silicon chips and an antenna that can transmit data to a wireless receiver. You may recognize the technology in your "Speedpass." But one A/E industry consultant thinks the chip may be the next big thing in intelligent building design.

According to Robert Martino, who leads the building security consulting team for consultant Shen Milsom & Wilke, his firm is studying the use and installation of RFID in a new healthcare facility scheduled for completion in 2010. The system will use the facility's information technology and telecommunications infrastructure.

According to Martino, the signal from a chip is transmitted to a computerized database where it triggers a range of different actions. "If the chip is part of a hospital patient's ID bracelet, it might indicate that the patient needs medication or is ready for a meal. A physician might use a laptop or handheld computer to intercept a patient's ID and automatically connect to his or her chart, or it may be embedded in an IV pole so that a nurse can locate it." says Martino.

RFIDs, he says, can—and will—be used to track everything from product inventory to people, says the consultant. "And they are increasingly important to intelligent building design."

As an example, he says SMW is using its experience with building security, wireless and audiovisual technology to create paging systems that combine with RFID to create a system that "knows" where a worker is. The system automatically activates the speaker closest to the worker instead of disrupting the entire facility.

The chip is available in a range of configurations, as a flat card, tag, bracelet, or embedded device. In this way, a chip might be attached to a part in a manufacturing facility that is then tracked throughout the plant to make sure it follows the correct path. A chip might even be implanted in an employee's ID card so that office security can track that individual's movements.

Ultimately, he says, RFID technology will tie into the Internet.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me