Results Announced for 2005 Lighting Certification Exam


Some 220 lighting practitioners sat for the 2005 Lighting Certification Examination, according to Robert Cilic, LC, with OSRAM Sylvania and president of the National Council on Qualifications for the Lighting Professions , Austin, Texas.

NCQLP is a non-profit association, founded in 1991 to promote effective and efficient lighting practice. Through a peer review process, the NCQLP establishes the education, experience and examination requirements for certification in the lighting industry.

In July 2005 , we reported that the U.S. General Services Administration (GSA) has recognized the LC certification credential and included in its Facilities Standards for Public Buildings Service: “Lighting design shall be performed or supervised by a practitioner credentialed as Lighting Certified (LC)…”

While we were unable to confirm this requirement with GSA (the agency did not respond to our attempts to contact them), we did solicit and receive opinions from the engineering community ( GSA Mandate Gets Mixed Reviews ).

As a result of the 2005 LC exam, with a pass rate of 77.5%, the roster of LCs has been increased by 171. Those who became LCs in 2005 now bring the total number of LCs to 1,444; in addition, there are 41 intern LCs.

The intern LCs aregraduate andundergraduate students in lighting who tookthe exam as participants in the NCQLP intern program. Students from an accredited college offering a minimum of 12 credit hours in lighting or lighting related courses can apply to take the LC examination as an intern. Four students from the University of Nebraska, two students at PennState and one student attending the Lighting Research Center, Rensselaer Polytechnic Institute, sat for the exam; five of those have now earned their designation as Intern LCs.

Of those who successfully completed the 2005 examination, 27.5% identify themselves as electrical engineers and 24% as lighting designers/consultants.

Approximately 39% list experience levels at 6-10 years, with another 26.9% indicating 11-20 years of experience.

An average of 62% of the new LCs hold bachelor degrees; while 17.5% have advanced degrees.

Almost 49% identify themselves as members of the IESNA, with an average of 64.9% over eight years; 3.5% belong to the IALD, averaging 12.3%.There were 17% who are P.E.s, and 2.3% are licensed/ registered architects.

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me