Publication updates

AMCA Publication 502-06 (R2009), Damper Application Manual for Heating, Ventilating, and Air Conditioning, was reaffirmed by the AMCA membership on Sept. 11, 2009. Publication 502-06 (R2009) provides general information and important points to consider when designing or specifying HVAC installations requiring dampers in specific temperatures and pressures.

10/01/2009


 

AMCA Publication 502-06 (R2009), Damper Application Manual for Heating, Ventilating, and Air Conditioning, was reaffirmed by the AMCA membership on Sept. 11, 2009. Publication 502-06 (R2009) provides general information and important points to consider when designing or specifying HVAC installations requiring dampers in specific temperatures and pressures.

 

To order this publication, visit www.amca.org . For more information, contact Tim Orris at torris@amca.org .

 

AMCA International approved the July 2009 revision to AMCA 311, Certified Ratings Program—Product Rating Manual for Fan Sound Performance. Products that can be licensed by AMCA to bear the AMCA Certified Ratings Seal are centrifugal fans, axial fans, power roof ventilators, air curtains, agricultural fans, and other air moving devices within the product scope of AMCA.

 

The AMCA 311 manual is intended to prescribe the technical procedure used in connection with the AMCA Certified Ratings Program for Fans—Sound Performance. The program applies only to complete air moving devices that are already licensed to bear the AMCA Certified Performance Seal for Air Performance.

 

To order this publication, visit www.amca.org . For more information, contact Joe Brooks at jbrooks@amca.org .

 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me