Promoting Performance-Based Design-at Home

As the leader among industrialized countries in fire death rates, the United States is lagging significantly behind other nations in the adoption of performance-based fire-safety practices, according to a recent report released by the Worcester Polytechnic Institute (WPI) Center for Firesafety Studies, Worcester, Mass.

01/01/2001


As the leader among industrialized countries in fire death rates, the United States is lagging significantly behind other nations in the adoption of performance-based fire-safety practices, according to a recent report released by the Worcester Polytechnic Institute (WPI) Center for Firesafety Studies, Worcester, Mass.

"Modern performance-based practices not only stand to yield higher levels of building safety at less cost, but also offer more flexibility in achieving a wide range of public-policy goals," explains David A. Lucht, P.E., the center's director. "Unfortunately, these approaches have not yet found their way into routine day-to-day building-code and -design practice in the United States."

With fire property damage costing the United States between $100 billion and $200 billion per year-approximately 2 percent of the gross domestic product-the report, "Regulatory Reform and Fire Safety Design in the United States," urges officials to encourage leadership and coordination in establishing a greater national vision of fire-safety standards and practices.

Because U.S. building safety is deferred to state and local governments-which, in turn, look to model codes and standard groups-performance-based design, like any change in building practices, must travel an obstacle-ridden regulatory road before garnering wider acceptance in the U.S. building industry, says the report.

It was this challenge that 120 engineers, architects, code officials, attorneys, academics and researchers sought to address at WPI's conference last year. With much of the information in WPI's report gleaned from conference presentations and discussions, the paper sets forth a number of goals to help promote performance-based design, including:

  • Establishing a national forum where various stakeholder groups can come together and define a national vision for the future of performance-based design in the U.S.

  • Strengthening research on performance-based fire-protection engineer-design methods and regulatory practices.

  • Increasing public and private sector resources to execute, review and approve performance-based designs.

  • Improving education and certification programs.

The report also presents a number of performance-based design benefits such as:

  • Reduced regulatory burden.

  • Enhanced international competitiveness.

  • More safety at lower cost.

  • More flexibility in design.

For more information about the Conference on Firesafety Design, log on to: www.wpi.edu/+FPE/Conf.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me