ProMat, robotics shows to combine forces in 2011

Material Handling Industry of America and the Automation Technologies Council announced that ProMat and The International Robots, Vision & Motion Control Show will collocate in 2011. Both exhibitions will be held March 21-24, 2011 at Chicago’s McCormick Place. ATC is the umbrella group for Robotic Industries Association, Automated Imaging Association and Motion Control Association.

02/01/2010


 

 

 

Material Handling Industry of America and the Automation Technologies Council announced that ProMat and The International Robots, Vision & Motion Control Show will collocate in 2011.

 

Both exhibitions will be held March 21-24, 2011 at Chicago’s McCormick Place. ATC is the umbrella group for Robotic Industries Association, Automated Imaging Association and Motion Control Association.

 

“The decision to collocate ProMat 2011 and the International Robots, Vision & Motion Control Show was made for several reasons,” according to John Nofsinger, Chief Executive Officer for MHIA. “Co-locating the two events will allow manufacturing, distribution and supply chain professionals unparalleled education and networking opportunities as well as exposure to the largest equipment and technology display of any show of its kind in North America.

 

“In today’s world of needing to be nimble and innovative, the collocation is a home run for participants and attendees of both events.”

 

“Robotics, vision and motion control are important components as companies strive to reach their productivity goals,” said Jeffrey A. Burnstein, President of ATC. “We feel this collocation provides an incredible opportunity for the exhibitors and visitors of each show to meet new prospects and suppliers, see new products and obtain new knowledge.”

 

Show officials said the collocated ProMat 2011 and International Robots, Vision & Motion Control Show will be the largest international event and conference of its kind ever held in the U.S.

 

More than 825 exhibitors are expected to showcase their solutions to tens of thousands of manufacturing, warehousing and distribution professionals from more than 100 countries around the globe.

 

“Over the past several years, ProMat has experienced a steady increase in both quantity and quality attendees and exhibitors delivering more material handling and logistics solutions for the supply chain. The collocation of the International Robots, Vision & Motion Control Show is a natural value-adding fit for both events,” said Nofsinger.

 

 

 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me