Programmable Electrical Infrastructure Debuts at Greenbuild

11/21/2006


Green building continues to grow—and at this year’s annual Greenbuild conference, held at Denver's Colorado Convention Center from Nov. 14-17, manufacturers of M/E/P building systems planted in attendees’ minds an idea of just how vital a role they can play in the sustainability movement.

Zeeland, Mich.-based Convia, for example, debuted its signature product, Programmable Infrastructure, at the Greenbuild Expo. Programmable Infrastructure is a modular and programmable electrical infrastructure that delivers "plug-and-play" power anywhere within a commercial space without requiring hardwiring of devices or switches. Eliminating the constraints of traditional electrical systems, the system is intended to allow users to accomplish all of what they can with traditional wiring systems, but with installation costs that are at or below standard wiring, and life cycle costs that are a fraction of the cost of traditional electric.

"In today's fast-paced marketplace, companies are constantly up- or downsizing," said Randy Storch, president of Convia. "Renovating space can be a headache for all parties involved, from tenants and building owners to operators and contractors. With Convia, electrical reconfigurations that could take days or even weeks to complete with traditional hardwiring can be performed within minutes at no cost."

Using infrared technology via a secure, remote control "wand" designed by Grimshaw Industrial Design, Convia offers programmable electricity and allows users to install, upgrade or relocate any electrical device (e.g. lighting fixtures, security cameras, electronic displays, thermostats, speakers, etc.), switch or sensor in moments. Using the wand, any off-the-shelf electrical or electronic devices that are plugged into the system connectors can be "programmed" and grouped with each other via a communication and control network, regardless of what electrical circuit they are connected to.

To personalize space, users simply "point and click" a two-button wand to change the power connection. In addition, the system delivers high-speed Ethernet capabilities to any IP appliance such as digital displays, VOIP or wireless hubs that receive power from the system.

The connection with Greenbuild, company officials argue, is that the system also may contribute points to the Leadership in Energy and Environmental Design (LEED) Green Building Rating System by enabling more cost-effective adoption of efficient devices and components. In addition, Convia officials argue, the system eliminates landfill waste that often is created when buildings using traditional electric infrastructure are modified, because 100% of the system’s components are reusable. On average, the renovation of a 20,000-sq.-ft. space would yield waste of approximately 10,000 ft. of branch conduit, all associated fittings and supports, 600 backboxes for branch wiring, 40,000 ft. of branch circuit wire and 62,000 ft. of telephone and data wires.

For more about programmable electrical instructure from Convia, click here .





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me