Proactive energy bill approved

President Bush signed the Energy Independence and Security Act of 2007 into law Dec.19. The act has several sections: • It phases out the use of inefficient incandescent lights and imposes improved energy efficiency standards on a wide variety of products. According to the American Council for an Energy-Efficient Economy, the new standards for light bulbs require them to use about 20% to ...

01/01/2008


President Bush signed the Energy Independence and Security Act of 2007 into law Dec.19. The act has several sections:

• It phases out the use of inefficient incandescent lights and imposes improved energy efficiency standards on a wide variety of products. According to the American Council for an Energy-Efficient Economy, the new standards for light bulbs require them to use about 20% to 30% less energy by 2014, while requiring the U.S. Dept. of Energy to set standards for light bulbs to cut their energy use at least 35% by 2020.

• This act calls for accelerated research and development and deployment of renewable energy technologies, although all the provisions are subject to congress-ional appropriations of funds. Research will be conducted in the areas of solar energy, geothermal energy, and marine and hydrokinetic energy.

• It mandates a 40% increase in fuel economy by 2020 and requires the Dept. of Transportation to set more stringent fuel economy standards with cars made in 2011.

• The act boosts the requirements for renewable fuel use to 36 billion gallons by 2022. The act requires advanced biofuels—defined as fuels that cut greenhouse gas emissions by at least 50%—to provide 21 billion gallons of fuel by 2022, or about 60% of the total requirement.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me