Power measurement products monitor loads, detect pump failures

Wago unveils new power measurement modules. The new line features components made for industrial and building applications.

01/17/2014


Wago introduced a new power measurement family including the 750 Series, 3-Phase Power Measurement Modules, the 855 Series, and the 857/798 Series.

Wago's new power measurement modules can be integrated into a Wago-I/O-System node with other standard digital and analog input and output signals. This system can be networked to an existing control platform. If an integrated solution is not required, Wago signal conditioners can convert standard 1 A or 5 A current transformer or Rogowski coil signals into a standard PLC analog signal type.

Applicable across multiple sectors

Of the 26.7% of U.S. electrical consumption that comes from the industrial sector, 64% is attributed to motor-driven equipment. Power-measurement products can be used to measure and collect motor current data to detect instant or cumulative loading to protect an installation from potential failure or extraordinary energy usage.

Applications of the new power-measurement product line include:

  • General load monitoring and phase balance.

  • Detecting over-tonnage conditions in automotive stamping operations.

  • Detecting pump failures or cavitating pumps in lube or hydraulic pump systems.

  • Overload of conveyor motors or broken belts in material handing applications.

  • Preventing damage to gear boxes and drive shafts on index tables.

- Edited by Jessica DuBois-Maahs, Associate Content Manager, CFE Media, Plant Engineering, Control Engineering



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me