Penn State Researches IAQ in Government Buildings


Research to improve indoor air quality in government buildings, among other projects has recently been funded by ASHRAE.

Twelve students have been approved to receive a total of $100,000 through ASHRAE’s grants-in-aid program, which is designed to encourage students to continue their education in preparation for service in the HVAC industry.

The recipients were chosen by the Society’s Research Administration Committee at the 2005 Winter Meeting held Feb. 5-9. The grants are awarded to fulltime graduate students of ASHRAE-related technologies. Fifty-five applications were received.

Results from the projects may be incorporated in the ASHRAE Handbook. One of the projects funded was for study of county and state government buildings, which present a moderate safety risk in case of bio-contaminant dispersion. While most buildings have plans for evacuation and bomb detonation, they do not have capabilities for ventilation for air recirculation cutoff in case of an air-system safety hazard, according to Tracey Nawrocki of Penn State University (PSU).

“To keep occupants safe, air systems need to be upgraded just as surveillance and weapon detection systems have been upgraded in the past few years,” says Nawrocki, whose research will focus on Investigation of new sensoring technology and guidelines for preparing existing variable-air-volume (VAV) systems for response to contaminant dispersion in moderate-risk office buildings.

An environmental chamber at PSU will be used to simulate and test specific office zones with actual VAV system settings and the effectiveness of sensor equipment in the zones. Using those measurements, computational fluid dynamics simulation of the entire building comparing different sensoring equipment configurations will be used to produce information that shows how existing VAV systems can be modified to prepare buildings for response to bio-contaminant dispersion.

For more information go to .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me