New Products: Metering and Measuring Power


Current loggers record true RMS measurements of current parameters and include integral, flexible current probes for three-phase measurements up to 3000 Amps. Units are battery operated and allow recording over long time periods by reducing stored sample resolution of oldest data. Loggers can store up to 480,000 points and 64 samples per cycle. Included software aids analysis and report generation. For more information from AEMC Instruments, click here .

Wireless energy submeters enable cost allocation in a range of applications, from residential apartments to in-plant departmental installations. Standard interfaces include 802.11 wireless Ethernet Modbus TCP, RS485, and RJ45. Standard Modbus interface allows units to interface with most energy-management and SCADA systems, without requiring proprietary software or communication channels. For more information from Electro/GaugeTech, click here .

Motor and drive troubleshooting kit includes an insulation multimeter, current clamp and rotary field indicator. Multimeter includes an insulation tester and can be used for troubleshooting and preventive maintenance on motors, motor drives, cables and switchgears. Current clamp can be used with multimeter to measure current without breaking the circuit, while rotary field indicator allows users to check rotation of three-phase motors. Multimeter and clamp feature CAT III 1000 V/CAT IV 600 V overvoltage rating, and rotary

Automatic circuit identifiers are offered in two models, with either a digital receiver and non-contact voltage sensor and GFCI tester or with an analog receiver. Units feature audible and visual indicators to verify presence of power on a 120 VAC circuit. Digital unit also includes a low-battery indicator. For more information from Ideal, click here .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me