New Products for Fire and Life Safety


Intelligent sensing technology delivers rapid, intelligent response to incipient fire signatures, while substantially reducing nuisance alarms. By integrating sensing and control technologies, systems offer stability and early warning capability. Technology includes cooperative sensing, supervisory smoke, detector sensitivity adjust, maintenance warnings and a self-optimizing pre-alarm. For more on Onyx intelligent sensing from Notifier click here .

Ceiling-mounted notification appliances include multi-candela strobes, audible/visual appliances, chimes and chime strobes, and speaker and speaker strobes. ADA restrictions on ceiling strobes have been eliminated, and new performance-based NFPA codes have opened the door to a wide range of new products. The maker also provides a tool that will calculate the appropriate candela for an application based on NFPA performance codes. For more information on notification appliances from Wheelock, click here .

Beam Smoke Detectors are designed to protect difficult open spaces with high ceilings. Single-ended, reflected-type detectors feature a four-wire design and are said to be easier to install than dual-ended projected beam detectors because alignment is accomplished via an optical sight and a built-in, two-digit signal strength meter. Available with an integral sensitivity test module, these detectors provide 16- to 328-ft. protection coverage in a broad operating temperature range (-22 here .

Fire code inspections application is designed to simplify building inspections for fire marshals and fire departments. Featuring compatibility with pocket PC devices, the software is designed to assist U.S. fire departments that are required to conduct thousands of fire code and fire equipment inspections at local buildings and restaurants in accordance with regulatory agencies such as the National Fire Protection Association (NFPA). For more information on fire inspection software from Brady/TISCOR, click here .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me