New Products for Electrical Systems


Variable frequency drive series now includes 600-volt rating, opening up use to a number of new applications. The product line features a control panel with the look, feel and functionality of a mobile phone and features two soft keys, the functions of which change according to the operating state of the panel. A built-in help button and a real-time clock assist in drive setup and fault diagnostics. For more about ACH550 drives from ABB, click here .

Time/voltage capacitor bank control automatically controls power capacitors in an electric utility distribution system. A GPS receiver obtains accurate time and date information and eliminates the need for a battery backup system to keep time during AC power interruptions, as the signal is acquired upon each power-up. For more information about the GPS24 from Accurate Controls, click here .

Automatic transformer turns ratio set for single- and three-phase transformer testing is able to accurately measure a turns ratio of 20,000:1 in less than five seconds and can locate a range of problems, including those in transformer windings and magnetic core circuits. In addition to measuring small ratio changes, the unit measures excitation current and normal and reverse polarity of single-phase transformers. For more about the TTR25 from Megger, click here .

Port outlet box provides multimedia flexibility for open office environments that experience continuous reconfigurations. The modular design with an expandable cable entry adjusts to fit different cables and a range of bundle sizes, and is quick and easy to install, covering multiple media types and applications. The box can be used in conjunction with pre-assembled cable runs that have been previously identified and tested allowing for a faster, more economical and reliable installation. For more about the Mini-Com MuTOA 6 from Panduit, click here .

Power-over-Ethernet (PoE) unit features IEEE 802.3af compliance and supplies 657 watts of power at 48/51 volts DC for endspan and midspan PoE implementations, along with an isolated 12-volt for a distributed power source. here .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me