New Products: Chilling News


Centrifugal chiller
capacity has been extended to provide the industry with what is claimed to be the largest-capacity, single-package chiller using HFC-134a. This increases the chiller’s previous capacity by 75%, while its compact footprint is said to be as much as 50% smaller than chillers of comparable capacity. For more information about MaxE YD from York, click here .

Large capacity industrial water chiller has been reintroduced to the market after a six-year absence. With a capacity performance in the nominal 3,000-, 4,000- and 5,000-ton range, the unit uses environmentally sound HFC 134a refrigerant. A steam turbine, electric motor or gas engine drive can be selected to match the most economical fuel available. Dual-drive steam turbine and electric motors have been applied, giving the owner-operator maximum flexibility. For more information about Model 17DA from Carrier, click here .

Recirculating chiller selector tool selects up to five recirculating chillers, based on user input that will work for a particular application. The selection process can be further refined by inputting the set point temperature, ambient temperature, desired flow rate, or power configuration.The user then configures the chiller by selecting a pump, controller package, and options. The tool provides pump curves and complete descriptions of the controller packages and upgrade options. For more information on selector tool from Lytron, click here .

Centrifugal chiller has magnetic bearings that offer oil-free, frictionless operation as low as 0.375 kW per ton IPLV. Full-load performance is as low as 0.62 kW per ton, which the vendor claims is about 32% more efficient that screw compressor chillers. The magnetic bearing technology is also said to reduce sound levels. For moreinformation about chillers from McQuay, click here .

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me