New Alloy Could Be Battery Ally

In a classic case of a mistake leading to a better solution, scientists have developed a new metal alloy that could enhance the performance of rechargeable nickel/metal hybride (Ni/MHx) batteries. The alloy lacks cobalt, making it less expensive than current models, and no cadmium, a toxic metal found in nickel-cadmium batteries.

09/01/2002


In a classic case of a mistake leading to a better solution, scientists have developed a new metal alloy that could enhance the performance of rechargeable nickel/metal hybride (Ni/MHx) batteries. The alloy lacks cobalt, making it less expensive than current models, and no cadmium, a toxic metal found in nickel-cadmium batteries.

Researchers made the discovery while exploring ways to improve both charge-storing capacity and repeat-charging capabilities of Ni/MHx batteries. They hoped to improve performance by adjusting the composition of the batteries' electrode. Composed of a core of nickel surrounded on the periphery with lanthanum, these electrodes corrode over time due to the expansion and contraction of molecules caused by repeated charging and discharging.

Initially, the scientists found that by combining a number of metals with the nickel made for a more resilient electrode. However, one of the metals, cobalt, was cost prohibitive. While investigating cobalt-free alternatives, researchers found a combination of lanthanum, nickel and tin with a high storage capacity that didn't decay over time.

Further study revealed that this new alloy actually contains a slightly higher ratio of nickel and tin than had been intended. The result is that batteries incorporating this new alloy in the electrode have a higher long-term energy-storage capacity than commercial models using cobalt alloys.

From Pure Power, Fall 2002





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me