New 62.1 Procedure Focus of ASHRAE 2005 Course


ASHRAE members this summer will have the opportunity to learn about using the overhauled ventilation rate procedure in Standard 62.1, the focus of a short course at ASHRAE’s 2005 Annual Meeting in Denver next month.

The course, Complying with Requirements of ASHRAE Standard 62.1-2004 , will be held from 2-5 p.m. Tuesday, June 28. The rate procedure is one of many changes to ASHRAE Standard 62.1-2004, Ventilation for Acceptable Indoor Air Quality . Course instructor Hoy Bohanon, P.E., said the procedure makes it more straightforward for designers to determine rates and reduces the potential for over-ventilation in some densely occupied spaces.

“Using the procedure gives you a better balance,” he explained. “You get a more accurate balance of indoor air quality and energy efficiency by doing the more precise calculations.”

The procedure bases ventilation requirements on the number of people a space is expected to hold, as well as the space's floor area, and is used to calculate minimum outdoor ventilation requirements for a building ventilation system.

Go to to register for the course or to learn more about the 2005 annual meeting.

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me