National labs partner with Dow Chemical Co. to improve cool roof technology

The groups aim to support research that will increase energy savings from existing cool roof technologies by more than 50%.

04/18/2011


The U.S. Dept. of Energy (DOE) announced that Oak Ridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) have joined with Dow Chemical Co. as part of a cooperative research and development agreement to fund key research that will help develop the next generation of cool roof technologies in the U.S. The agreement will support research to increase the energy savings from existing cool roof technologies by more than 50%, decreasing the nation's carbon footprint and providing an opportunity for Americans to save money by saving energy.Green Roof

"Cool roofs are one of the quickest and lowest cost ways we can reduce our global carbon emissions and begin the hard work of slowing climate change," said U.S. Energy Secretary Steven Chu.

ORNL will partner with LBNL to capitalize on the broad range of cool roof technology experience from their applied research in this field. In partnership with Dow, the national laboratories will work to improve the ability of roof coatings to continue reflecting sunlight after years of exposure to the elements, which involves improving the long-term resistance of these materials to dirt build-up and microbial growth. The goal is to design and commercialize the next generation of cool roof components that can significantly reduce the energy consumption of new and existing buildings.

The replacement or resurfacing of conventional roofing materials with improved reflective roof coatings could help save up to 25% on air conditioning energy costs, up from to 15% savings with existing cool roof coatings. This would reduce annual carbon dioxide emissions by 5 metric tons for every 10,000 sq ft of commercial building roof area.

Commercial buildings in the U.S. today offer an opportunity to retrofit over 20 billion sq ft of roofing space. A study by researchers at LBNL found that using cool roofs and cool pavements in cities around the world can help reduce the demand for air conditioning, cool entire cities, and potentially cancel the heating effect of a year of worldwide carbon dioxide emissions. Energy savings are highly variable based on levels of installed insulation, climate, and other related factors. DOE has a calculator to help building owners determine the potential savings of their buildings.

The DOE completed the installation of a cool roof in December 2010 that covers approximately 25,000 sq ft on its Headquarters West Building in Washington, D.C. This spring, DOE will also install a cool roof on the Headquarters South Building, covering approximately 66,000 sq ft. As a result of the new cool roof installations on both buildings, taxpayers will save a total of $8,000 per year in energy costs. Chu encouraged other federal agencies to take similar steps at their facilities. DOE has released Guidelines for Selecting Cool Roofs, which provides technical assistance on types of roofing materials and how to select the roof that will work best on a specific facility.

Click here for more information about cool roofs from the DOE.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me