Mount outlet boxes provide control cabinets power for equipment

Wago Corporation’s CPO Series DIN-rail Mount Outlet Boxes provide control cabinets with power for common tools including laptops and testing equipment.

10/25/2010


Wago Corporation’s CPO Series DIN-rail Mount Outlet Boxes provide control cabinets with power for common tools including laptops and testing equipment. Designed by Wago Corporation’s Custom Products Group, the CPO Series uses a UL498 Receptacle — ideal for UL508 panels.

Addressing requests for compact duplex supplies, the CPO’s compact PVC housing measures just 60 mm x 109 mm and features an ABS plastic cover. The CPO Series employs a top-mount ground pin, preventing loose metal objects (e.g., conductor strands) from shorting hot and neutral pins together. For varying termination needs, the CPO Series offers either color-coded Cage Clamp Spring Pressure termination or MCS Pluggable Connectors. Regardless of connector selected, both provide clearly marked input terminals and integrated test ports for troubleshooting.  

The CPO Series consists of 26 variants including: Duplex, GFCI, Isolated Ground and Switch models, as well as PCB-mount outlets. Specialty configurations, such as surge-protected and European “Schuko” outlets are also available. Depending on CPO variant selected, ratings range from 120–250 V and 15–20 A.

www.wago.us

Wago Corporation

- Also see:

Managing energy aboard largest solar-powered boat - Wago 758 Series IPCs are managing solar energy for Turanor PlanetSolar, the world’s largest solar-powered boat.

Panel feedthrough terminal block uprated to 600V


- Edited by Amanda McLeman, Control Engineering, CFE Media, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me