Motion module for profile programming

The QD77MS by Mitsubishi Electric is compatible with multiple controllers and drives and can simplify programming complex motion profiles to reduce engineering costs.

11/30/2012


The QD77MS by Mitsubishi Electric is compatible with multiple controllers and drives and can simplify programming complex motion profiles to reduce engineering costs. Courtesy: Mitsubishi ElectricMitsubishi Electric’s QD77MS simplifies programming of complex motion profiles, reduces engineering costs and minimizes learning curves. 

Users with minimal programming experience in creating motion profiles can do so intuitively, thanks to the motion controller’s position table and mechanical editor system. The QD77MS also supports advanced motion functions such as cam profiles and registration, speed, position and torque control. 

Available with 2-, 4- or 16 input/output axes, the QD77MS Simple Motion Module uses the iQ automation and control platform. The iQ Platform combines all aspects of control. These include PLC, motion, CNC, HMI, robotics and communications in a compact, rack-based configuration. 

Other advantages of the QD77MS Simple Motion Module include: 

  • Programming and set up of both PLC and motion control using a single software program -- GXWorks 2. 
  • Controller compatibility, assuring smooth migration to improved technology platforms using tools that offer motion project diversion and project recycling capability. 
  • Drive compatibility, allowing use of either existing or newer technology servo amplifiers for actuation control. 
  • A high-speed 300 Mbps communication network that improves system response and data capacity, and provides full insight into the control dynamics. Metrics such as power consumption can also be measured over this network. 
  • A function block library on the 2-, 4- and 16-axes modules. With the connectable servo drives, users can reduce total energy consumption. 

Mitsubishi Electric Automation, Inc.

www.meau.com 

 

 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me