Motion dimmer

The Zone/Motion Dimmer converts an ordinary fixture into a zoned fixture based on occupancy using any low-cost security type motion sensor.

12/19/2014


The Zone/Motion Dimmer converts an ordinary fixture into a zoned fixture based on occupancy using any low-cost security type motion sensor.The Zone/Motion Dimmer for lighting fixtures are an energy saving product. The Zone/Motion Dimmer converts an ordinary fixture into a zoned fixture based on occupancy using any low-cost security type motion sensor. It comes by itself  or with a ceiling mount motion detector. Both fluorescent and LED troffers with 0 to 10 V dimming controls are supported, and up to ten troffers can be driven by a single dimmer. The product is compatible with existing wall switches and converts any zone so the lights are bright when occupied and dimmed when unoccupied. Adjustments are provided for both the brightest and the dimmed level as well as the timeout after occupancy ends. Substantial energy savings have been reported. 

Peak Demand Automation

www.peakdemandautomation.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me