Motion control system for demanding industry applications

New drive module for NYCe4000 can drive up to 5 axes of brushed or brushless motors

12/22/2010


The NYCe4000 motion control system is widely used to control demanding applications in the Semiconductor, Solar and Metrology industry. With its up to 10 integrated amplifiers it is a very attractive solution for controlling a large number of axes in an environment where space is limited. With the introduction of an ultra-compact 5-axis drive module, the space utilization can be optimized even further.

Ultra compact

The new 5-axis drive card has an ultra-compact size of 120x140x20-mm. Multiple cards can be combined in a single housing with a motion controller. This makes it possible to control up to 10 axes in a very compact space.

Brushed and brushless motors

The new 5-axis drive module uses PWM amplifiers that can be configured in software to handle either brushed or brushless motors. The ability to control these different motor types from the same drive allows the user to simplify system architecture and reduce cost. The power range of the amplifiers is up to 70W. This complements the existing integrated drive modules that can handle up to 1000W.

Variety of encoder protocols

With the wide variety of encoder protocols available in the market today, it is vital to have an open architecture. The Rexroth NYCe4000 system therefore allows the user to connect a variety of encoder types to the same physical interface. The encoder protocol can simply be selected in software.

Integrated I/O

To be able to interface with sensors and external devices, all NYCe4000 drive modules come with integrated I/O. The tight integration of the I/O with the drive allows e.g. high-speed position capturing, laser synchronization, and brake control.

 www.boschrexroth-us.com

Bosch Rexroth AG

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me