Monitoring system with low-measurement sensitivity

PM 100 PRO allows for low-measurement sensitivity and provides seamless EPA, MACT, and NESHAP compliance.

02/11/2016


PM 100 PRO allows for low-measurement sensitivity and provides seamless EPA, MACT, and NESHAP compliance. Courtesy: FilterSenseFilterSense's PM 100 PRO with DynaCHARGE technology allows for measurement sensitivity as low as 0.1 mg/m3. With its digital signal processor and full-color display, the PM100 PRO provides a range of Features that make process control and EPA, MACT, and NESHAP compliance seamless. In terms of performance, the PM 100 PRO comes standard with on-screen trending, comprehensive alarm management, options for an integrated historian, and EPA quality assurance checks. With single- and multichannel configurations, this solution fits for sensing-performance requirements ranging from detection to monitoring and concentration measurement in the power, bulk solids, metals, and chemical industries.

FilterSense

www.filtersense.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me