Metering utility plant's power

12/01/2009


 

View the full story, including all images and figures, in our monthly digital edition

 

Southern California Edison (SCE) serves more than 13 million customers in 11 central, coastal, and southern California counties. In the southern half of SCE's service territory lies the Inland Empire, which is an area of 27,298 sq miles of commercial, industrial, and residential zones. The rapid growth of the area presented a critical need for electrical power in the wake of frequent deregulation blackouts and brownouts during the early part of the decade. In early 2006, the area's need for additional power was met by the completion of the Mountainview generation facility in Redlands, Calif. The Mountainview facility, which was the state's first new utility-developed power plant in 15 years, provided 1,054 MW of additional capacity to the grid.

 

Once operational, the utility launched a series of measures to improve service efficiency, while increasing responsiveness to regional power emergencies. As part of the process, SCE will construct 10 new customer service centers throughout its 50,000 sq-mile-service territory. In 2009 SCE opened its first service center in Wildomar, Calif. The new 97,553-sq-ft Wildomar facility features two multi-level main buildings and a single-story structure in the service yard.

 

Designed by Elements Architecture of San Juan Capistrano , the $38 million plant features solar panels installed over the service yard to generate electricity for the fuel dock, overhead lights, and other circuits. The plant uses energy-efficient lighting that automatically adjusts based on natural light levels during daylight hours. The energy-efficient measures helped the building receive a LEED-Gold certification from the U.S. Green Building Council.

 

In order to meet the LEED requirements for measurement and verification of a facility's energy envelope, the Wildomar facility selected D-Mon electric submeters from E-Mon LLC , Langhorne, Penn. Sunwest Electric, based in Anaheim, Calif., specified 277/480 V, 3-phase/4-wire E-Mon D-Mons to monitor electrical consumption (kWh) and demand (kW). Sunwest placed two meters on the 200 A circuits, one on the 1,600 A circuits, and one on the 3,200 A circuits in the three main buildings and the main switch board.

 

The submeters communicate raw energy data every 15 min. to the energy manager's PC via the facility's Ethernet local area network. “The E-Mon D-Mons were installed to see how much power is being consumed in each building and to compare this usage to similar non-green buildings,” said Sunwest Electric project foreman John Richards. “Benchmarking the energy-efficiency measures that were implemented in this facility will serve as a prototype for other service centers in the near future.”

 

The submeters allow commissioning agents to use the energy intelligence software to identify functionality and performance of electric, water, and gas systems. For new construction, like the Wildomar facility, the submeters provide a baseline facility energy performance to compare with that of other buildings of similar size and type. The D-Mon submeters helped the Wildomar facility collect LEED points in Commercial Interiors, Core & Shell, and Energy and Atmosphere sections.

 

 

 

Acknowledgements
Information provided by E-Mon LLC.

 

 

AT A GLANCE

At the new Mountainview customer service in Wildomar, Calif., the use of electric submeters to measure the facility's power usage helped contribute to its LEED-gold certification from the U.S. Green Building Council.

 

Sunwest Electric specified 277/480 V, 3-phase/4-wire E-Mon D-Mons to monitor electrical consumption (kWh) and demand (kW). Two meters were placed on the 200 A circuits, one meter was placed on the 1,600 A circuits, and one meter was placed on the 3,200 A circuits.

 

The submeters help the building's energy manager monitor the building's energy use by communicating raw energy data to a PC via the facility's Ethernet local area network.

 

The submeters helped the Wildomar facility collect LEED points in Commercial Interiors, Core & Shell, and Energy and Atmosphere sections.



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me