Metallic-finish devices and wall plates

The Pass & Seymour metallic-finish devices and wall plates are available in switches and dimmers, and GFCI, tamper-resistant, and USB charging receptacles.

09/17/2014


The metallic-finish devices and wall plates are available in switches and dimmers, and GFCI, tamper-resistant and USB charging receptacles.The Pass & Seymour Metallic-Finish Devices and Wall Plates are available in switches and dimmers as well as GFCI, tamper-resistant, and USB charging receptacles. All of the devices have matching screwless wall plates and their construction and finish allows them to stand up to the continuous usage of busy households. The Metallic-Finish receptacles also feature a Tamper-Resistant shutter system that prevents young children from inserting foreign objects. All of the devices are 15 A rated with 120, 125, and 120/277 V options available depending on the device functionality. Wall plates are available in one, two, three and four gang configurations. The devices are also Fed Spec, FSUL, and cULus compliant.

Legrand

www.legrand.us 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me