Manufacturing drove GDP growth in 2012

Commerce Department report finds durable goods jumped 9.1% last year

04/26/2013


Manufacturing’s meteoric rise as the driver of the U.S. economic economy continued in 2012, according to a new report from the U.S. Department of Commerce’s Bureau of Economic Analysis.

Gross domestic product in the U.S. rose 2.2% in 2012, driven primarily by a 6.2% increase in real value added from the manufacturing sector. “Durable-goods manufacturing, the largest contributor to overall growth in the economy for the third consecutive year, increased 9.1%, after increasing 6.8% in 2011 and 13.3% in 2010,” the report stated.

The manufacturing sector grew 4.7% in 2012 in terms of real GPD growth. That’s almost double the services sector growth rate of 2.4%.

The GDP has increase about 2% per year since 2010. In 20111, the manufacturing goods growth rate was just 0.8%, which dragged down the overall GDP growth to just 1.8%.

Other sectors contributed to the growth rate as well, as the overall economy continued to improve. There were 19 of the 22 industry groups showing growth. The finance and insurance industry sector posted its first growth in three years, rising 3.6%, while the wholesale trade group had its second straight year of solid growth, rising 4.8%.

Read the full report here



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me