Line scan camera with near-infrared technology

The Piranha HS NIR Line Scan Camera Camera from Teledyne Dalsa has enhanced quantum efficiency in near-infrared and features time delay and integration technology.

12/26/2011


The Piranha HS NIR Line Scan Camera has enhanced quantum efficiency in near-infrared and features time delay and integration technology. Courtesy: Teledyne DALSAThe Piranha HS NIR 8k camera by Teledyne Dalsa, is designed to meet the requirements of low light applications such as solar cell inspection, PCB/electronics inspection, large web applications and food and drug inspection.

The Piranha HS NIR is a cost-effective solution for imaging in near-infrared wavelengths from 700 to 1050 nanometers. It operates using selectable TDI stages, up to a maximum of 256, and has an area mode of operation for ease of alignment. The camera can be programmed with up to four user sets of coefficients and can utilize mirroring control, forward/reverse control, and flat field correction.

Key features

  • Enhanced sensitivity in NIR and 256 TDI stages provide excellent electroluminescence at 1000 nm wavelengths of light
  • High resolution images of 8192 x 256 TDI pixels
  • 320 Mpix/s throughput and 34.3 kHz line rate allow faster inspection times and higher productivity
  • Bidirectional operation greatly reduces cost by simplifying inspection process
  • 100x anti-blooming
  • Camera Link interface

Teledyne Dalsa Inc.

www.teledynedalsa.com

controleng.com/machinevision



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me