Legacy network connections

Consider these points when blending network upgrades and connecting to legacy networks.

07/27/2011


When connecting a legacy network, plan it out. Most networks can be connected, and multiple networks can be integrated. It is possible to keep existing network investments and move information to a higher-level network, such as an Ethernet protocol, according to Jeremy Bryant, industrial communications marketing manager with Siemens Industry Inc.

Look at the whole picture and consider the overall objective and the network design, he suggested, taking into account what the system needs to look like today and for the foreseeable future. Here are some additional considerations from Bryant for making legacy network connections:

  • For new projects, put everything on the new network, Ethernet when possible. Ethernet provides “a future proof concept, the potential of having just one network, and the ability to easily share data with higher level systems.”
  • Consider the cost and time involved in a full upgrade. Upgrades in pieces might be more practical. Updating the controller first then adding a gateway module to communicate with existing I/O connections allows flexibility to upgrade at a more practical pace.
  • An Ethernet backbone installation can use gateways to keep existing I/O connections with serial networks connected to long-used devices. 
  • PLC modules can serve as gateways to translate information.
  • Ethernet can add reliability by serving the backplane outside the control panel. Inside, use the network that makes sense.
  • For network selections (legacy serial networks or existing fieldbus networks), consider how many devices can be connected.

www.usa.siemens.com/automation 

www.controleng.com/new-products/industrial-networks.html

7 critical things to know about Ethernet

new-products/industrial-networks.html- Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me