It’s time to plan for water safety in all buildings

The complexity of water systems in today’s buildings warrant a need for a comprehensive water safety plan.


The complexity of water systems in today’s buildings warrant a need for a comprehensive water safety plan. Modern buildings comprise increasingly complex water systems. But complexity brings risks to health and safety that must also be understood and managed. I believe it’s time to convene a professional oversight group to look at the introduction of a comprehensive water safety plan for buildings. 

Today, resource-efficient building designs often incorporate water reuse systems, such as rainwater harvesting, greywater, and blackwater, alongside standard drinking-water provision. Hot- and cold-water distribution systems need to be designed to operate safely and hygienically with a range of demands placed upon them. Hot-water temperature needs to be regulated to control bacteria growth whilst avoiding potential scalding. And we need to plan for changing demands on water systems through a building’s lifetime, especially during periods of maintenance or while only partially occupied. 

Taken together, these water-related hazards, such as chemical and bacterial contamination, scalding, and over-pressure, lead to risks to building occupants. So designers need to understand and assess water hazards holistically to develop effective control measures. 

Sharing information and documentation is one way we could improve control. Designers would benefit greatly from simple documentation that could then be passed through from the installer to the operator of the building. It would ensure risks are properly considered and communicated from design, installation, and commissioning through to operation. This “chain of responsibility” would ensure that systems are operated and maintained in the manner that the designer envisioned and risks are properly controlled.

Important support for this approach already exists. World Health Organization guidelines refer to the benefits of water safety plans (WSPs) that incorporate the principles of other risk-management paradigms, including multibarrier, hazard analysis, and critical control points approaches. 

Currently, WSPs are considered the most effective means of maintaining a safe supply of public drinking water. Their use should ensure that water is safe for human consumption and meets regulatory water health standards. There also is comprehensive guidance available for developing WSPs for municipal water systems, such as the Water Safety Portal. These existing municipal WSP principles could be adapted for buildings.

Initial feedback on the use of WSPs from a joint conference of the British Standards Institution and Water Management Society suggests support for the use of risk assessments and management guidance together with a series of simple templates. This could provide an immediate basis for a WSP for buildings, which could be passed on through the chain of responsibility and used to understand and document the risks inherent with water systems. 

Martin Shouler is associate director at Arup. Martin is Arup’s global skills leader for environmental services engineering and works on a wide variety of projects related to water and wastewater systems.

The next step should be establishing an industry-expert working group to review the need and feasibility of introducing a water safety plan approach for water systems in buildings. This could include members from the Royal Society of Public Health, the Water Management Society Chartered Institution of Building Services Engineers, the Institute of Healthcare Engineering & Estate Management, the Society of Public Health Engineers, the Chartered Institute of Plumbing and Heating Engineering, and WaterSafe together with representatives from the water industry (water regulations enforcement) and other interested parties. 

This expert group would need to review the hazards facing buildings’ water systems and assess whether they are adequately controlled under current regulation and industry practice. They would also review how existing industry guidance could be adapted for use in buildings and consult with building owners, the water industry, regulators, and other interested parties on the value of undertaking a WSP for buildings. Finally, the group could outline a business plan to create a “WSP (Buildings)” resource for the industry. 

I would be interested to hear your thoughts on maintaining the safety of our water systems in and around buildings.

Martin Shouler is associate director at Arup. Martin is Arup’s global skills leader for environmental services engineering and works on a wide variety of projects related to water and wastewater systems. This article was originally published on Arup Thoughts. Arup is a CFE Media content partner. 

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me