It’s time to plan for water safety in all buildings

The complexity of water systems in today’s buildings warrant a need for a comprehensive water safety plan.


The complexity of water systems in today’s buildings warrant a need for a comprehensive water safety plan. Modern buildings comprise increasingly complex water systems. But complexity brings risks to health and safety that must also be understood and managed. I believe it’s time to convene a professional oversight group to look at the introduction of a comprehensive water safety plan for buildings. 

Today, resource-efficient building designs often incorporate water reuse systems, such as rainwater harvesting, greywater, and blackwater, alongside standard drinking-water provision. Hot- and cold-water distribution systems need to be designed to operate safely and hygienically with a range of demands placed upon them. Hot-water temperature needs to be regulated to control bacteria growth whilst avoiding potential scalding. And we need to plan for changing demands on water systems through a building’s lifetime, especially during periods of maintenance or while only partially occupied. 

Taken together, these water-related hazards, such as chemical and bacterial contamination, scalding, and over-pressure, lead to risks to building occupants. So designers need to understand and assess water hazards holistically to develop effective control measures. 

Sharing information and documentation is one way we could improve control. Designers would benefit greatly from simple documentation that could then be passed through from the installer to the operator of the building. It would ensure risks are properly considered and communicated from design, installation, and commissioning through to operation. This “chain of responsibility” would ensure that systems are operated and maintained in the manner that the designer envisioned and risks are properly controlled.

Important support for this approach already exists. World Health Organization guidelines refer to the benefits of water safety plans (WSPs) that incorporate the principles of other risk-management paradigms, including multibarrier, hazard analysis, and critical control points approaches. 

Currently, WSPs are considered the most effective means of maintaining a safe supply of public drinking water. Their use should ensure that water is safe for human consumption and meets regulatory water health standards. There also is comprehensive guidance available for developing WSPs for municipal water systems, such as the Water Safety Portal. These existing municipal WSP principles could be adapted for buildings.

Initial feedback on the use of WSPs from a joint conference of the British Standards Institution and Water Management Society suggests support for the use of risk assessments and management guidance together with a series of simple templates. This could provide an immediate basis for a WSP for buildings, which could be passed on through the chain of responsibility and used to understand and document the risks inherent with water systems. 

Martin Shouler is associate director at Arup. Martin is Arup’s global skills leader for environmental services engineering and works on a wide variety of projects related to water and wastewater systems.

The next step should be establishing an industry-expert working group to review the need and feasibility of introducing a water safety plan approach for water systems in buildings. This could include members from the Royal Society of Public Health, the Water Management Society Chartered Institution of Building Services Engineers, the Institute of Healthcare Engineering & Estate Management, the Society of Public Health Engineers, the Chartered Institute of Plumbing and Heating Engineering, and WaterSafe together with representatives from the water industry (water regulations enforcement) and other interested parties. 

This expert group would need to review the hazards facing buildings’ water systems and assess whether they are adequately controlled under current regulation and industry practice. They would also review how existing industry guidance could be adapted for use in buildings and consult with building owners, the water industry, regulators, and other interested parties on the value of undertaking a WSP for buildings. Finally, the group could outline a business plan to create a “WSP (Buildings)” resource for the industry. 

I would be interested to hear your thoughts on maintaining the safety of our water systems in and around buildings.

Martin Shouler is associate director at Arup. Martin is Arup’s global skills leader for environmental services engineering and works on a wide variety of projects related to water and wastewater systems. This article was originally published on Arup Thoughts. Arup is a CFE Media content partner. 

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me