International Code Council Adopts Electronic Monitoring of Fire Extinguishers


The International Code Council (ICC) voted unanimously in June to amend its International Fire Code (IFC) in order to permit electronic monitoring of fire extinguishers in lieu of 30-day physical inspections.

According to the ICC, 32 states use the IFC. Utah was the first state in the nation to adopt standards for the electronic monitoring technology. Moreover, state fire marshals in Maine, Nevada, New Hampshire and New Jersey have also given the go-ahead for occupancies to install such equipment while the necessary code changes are in process.

 

The new code language, which is endorsed by the National Association of State Fire Marshals (NASFM), does not mandate the use of electronically monitored fire extinguishers; instead it allows its use as an alternative to thirty-day physical inspections. IFC Section 906.2 was revised to include a second exception that reads, “The use of a supervised, listed electronic monitoring device shall be permitted in lieu of 30-day interval inspections, when approved.” The IFC change takes effect January 1, 2005.

 

Fire equipment industry studies show that 90% of 30-day physical inspections simply do not happen, according to John McSheffrey, vice president of MIJA, a manufacturer of this technology. “Large office towers can have hundreds if not thousands of extinguishers that must be checked manually each month—costing building operators both valuable time and money,” said McSheffrey. “In the event even one extinguisher is not properly inspected and it is not available in an emergency—the liability costs could be enormous. By implementing 24-7 electronic monitoring, safety is increased and liability is reduced.”

 

The National Fire Protection Association (NFPA) code NFPA-10 for commercial facilities requires physical inspections of fire extinguishers every 30 days for presence, position, pressurization and unobstructed access. McSheffrey says that extinguishers equipped with electronic monitoring exceed these requirements by monitoring constantly for presence and position while checking every 15 hours for pressure and obstruction to access. Fire extinguisher monitoring systems are also capable of generating a log of extinguisher readiness and impairment history, which is useful to both building owners and fire inspectors. For more information, go to www.iccsafe.org .





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me