Industry Roundup: Recent Accolades, Certifications and Awards

01/18/2005


Advance Transformer , Rosemont, Ill., was recently selected by the U.S. Dept. of Energy's National Energy Technology Laboratory to receive funding for future solid-state lighting product development activities. Advance's proposed project was accepted on such critical factors as energy savings potential, likelihood of success and ability to help secure our nation's energy future and technological leadership.

Danfoss announced that its president, Robert Wilkins, has received the 2004 Schulze Distinguished Service Award from the Air-Conditioning and Refrigeration Institute. Mr. Wilkins earned the award for his service to the air-conditioning and refrigeration industry as an ARI product section and committee chairman. He has served on ARI's Board of Directors since 1996, its Executive Committee since 1998, and was ARI Treasurer from 1998 to 2002.

Dranetz-BMI , Edison, N.J., has received certification on its PowerXplorer and PowerGuide power monitoring instrument line, judged fully compliant with all requirements under IEC-61000-4-30 Class A by Technology International (Europe) Limited (I2T), an independent testing facility.

Greenheck , Schofield, Wis., has been issued a patent by the U.S. Patent and Trademarks Office for a two-stage air purification system its engineers invented for installation and operation within a kitchen ventilation hood.

Lutron , Coopersburg, Pa., has pledged $250,000 to the National Association of Electrical Distributors (NAED) Education & Research Foundation.

MGE UPS Systems , Costa Mesa, Calif., is the recipient of a 2004 Product of the Year Award from Internet Telephony magazine for its Pulsar EX RT uninterruptible power supply, which offers power protection in high-density applications such as VoIP, telecom and critical networking operations.

S&C Electric Company , Chicago, announced that the John Mungenast International Power Quality Award has been presented to Brad Roberts, Power Quality Systems Director for S&C's Power Quality Products Division. Roberts has over 35 years experience in the design and operation of critical power systems, ranging from single-phase UPS systems to medium-voltage applications. The John Mungenast International Power Quality Award is given "for extraordinary contributions to the power quality field" by EC&M Magazine .

TOTO USA , Morrow, Ga., has received the 2005 Good Design Award from The Chicago Athenaeum Museum of Architecture and Design for its EcoPower Faucet, which operates on rechargeable batteries, designed to recharge every time the faucet is used.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me