Industrial panel UPS for manufacturing, water, wastewater, automation applications

The DIN Rail Industrial Panel UPS by Schneider Electric features an integrated dry contact and hardwired IO and is designed for industrial segment and automation control markets.

12/05/2012


The DIN Rail Industrial Panel UPS by Schneider Electric features an integrated dry contact and hardwired IO and is designed for industrial segment and automation control markets. Courtesy: Schneider ElectricSchneider Electric's DIN Rail Industrial Panel UPS (uninterruptible power supply), is designed for system integrators in various industrial market segments such as manufacturing, water/waste water, and automation controls markets. The unit provides 500VA of power and features an integrated dry contact input/output (I/O) that provides battery status and emergency power off without an additional accessory. Integrated temperature-compensated battery charging prolongs battery life by regulating the charge voltage according to battery temperature while an automatic battery self-test enables early detection and identification when a battery needs replacement. A knock out feature in the chassis wall and floor allows for connecting the battery externally to the UPS to meet NEC 480.9(A) compliance and other regional electrical codes. 

Additional features of the DIN Rail UPS include:

  • Hardwired I/O
  • Internal or external battery installation options; 3 m cable included for external installation
  • SmartSlot for optional, alternate communication accessory cards such as network management or Modbus
  • Replaceable batteries that can be installed by the user, eliminating the need for a specialized technician
  • Hot-swappable batteries for reduced downtime, which can be replaced even while the UPS is operating on utility power
  • DB-9 Serial Port Communications RS232 protocol
  • LED status indicators which alerts users to the state of the UPS: on-line, on-battery, battery disconnected, or battery needs to be replaced
  • Audible alarms to notify users of the following conditions: on-battery, low battery, replace battery

Schneider Electric

www.schneider-electric.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me