In the blogs at csemag.com

CSE's chief editor Michael Ivanovich launched a new series in recent weeks in his “Give and Take” blog. “This post is the starting point for a blog series on innovation,” Ivanovich wrote. “Your views are encouraged and welcome.” To join in the discussion, go to blogs tab on the www.

12/01/2007


CSE 's chief editor Michael Ivanovich launched a new series in recent weeks in his “Give and Take” blog. “This post is the starting point for a blog series on innovation,” Ivanovich wrote. “Your views are encouraged and welcome.” To join in the discussion, go to blogs tab on the www.csemag.com homepage.

Also in the blogs, CSE 's “Field Guide for Engineers” blogger, David Sellers, PE, posted a series of discussions about the “two-thirds” rule for locating sensors to control variable flow systems. Sellers wrote that he encountered an operating engineer who pointed out that a differential pressure sensor controlling chilled water distribution pumps was located so that it sensed the pressure across the mains leaving the plant. Sellers had heard that one saves energy by locating the sensor two-thirds of the way between the pumps and the most remote load. He thought that relocating the sensor might offer an opportunity but wasn't sure why.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me