In-floor active chilled beams

Tate's beams showcase the benefits underfloor air distribution.

08/15/2011


Tate’s in-floor active chilled beams are an energy-efficient perimeter heating and cooling solution that combines the benefits of underfloor air distribution with the efficiencies of water heating and cooling. The beams bring chilled water under the floor to cool air directly at the perimeter of a building, where heat loss and heat gain can significantly impact energy use. In-floor active chilled beams eliminate the need for spider ducting to deliver air to the perimeter and replace perimeter fan-powered boxes under the raised floor, allowing furniture and partitions to be placed freely in the building without concern for maintenance access to equipment. By using segmented or continuous linear grilles along the building perimeter, in-floor chilled beams seamlessly integrate into the design of the space, while ensuring expanded daylighting and access to views typically associated with underfloor air distribution.

www.tateaccessfloors.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me