IFMA and BOMA agree to common floor area measurement definitions

The International Facility Management Assn. and the Building Owners and Managers Assn. Intl. publish “A Unified Approach to Measuring Office Space,” a report outlining common definitions for floor area measurements as well as major revisions to IFMA and BOMA’s respective area measurement standards.


The International Facility Management Assn. (IFMA) and the Building Owners and Managers Assn. Intl. (BOMA) announced the publication of “A Unified Approach to Measuring Office Space,” a report outlining common definitions for floor area measurements as well as major revisions to IFMA and BOMA’s respective area measurement standards.
These common definitions will be incorporated into the standards supported by each organization, with the primary goal being to clarify building measurement and industry comparisons based on floor area measurements.
Currently, IFMA recognizes “The ASTM Standard Classification for Building Floor Area Measurements for Facility Management,” while BOMA supports “The ANSI/BOMA Standard Method for Measuring Floor Area in Office Buildings.” Together, the two standards form the foundation for benchmarking and best practice. They are commonly used by facility professionals, building owners and managers to measure floor area in office buildings.
IFMA and BOMA appointed a working group comprised of key members of both organizations to develop these common definitions. The professionals included had extensive experience in floor measurement issues. Their mandate was to develop commonly agreed upon definitions to be contained in each floor measurement standard as well as commentaries with parallel definitions that elaborate on the floor area measurement process. The definitions and commentaries are available in the new joint publication, and are meant to be uniform and easily understood by non-technical readers.
“We’ve known that the members of our community need a common communication protocol. They need one set of measurements and one methodology,” said Lynne Blair, IFMA chair of the working group and president of LY Blair & Associates in Ottawa. “It’s important to help them save time, effort and money, and with this new unified approach, we can do that.”
“The major benefit of this publication is that it establishes common terms and approaches for measurement that each organization will use as they revise their respective standards,” said Kent C. Gibson, CPM, BOMA chair of the working group and vice president of Zions Securities Corporation in Salt Lake City. “This allows both organizations to be consistent in going forward in the development of their standards. Part of the foundation has been laid.”
“A Unified Approach to Measuring Office Space” is currently being offered by IFMA and BOMA. To learn more about the publication, or to purchase it from IFMA, visit . BOMA members may purchase the document online at .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me