HVAC installation and maintenance kits

General Tools and Instruments' HVAC Meter Kit (KHV57030) and HVAC DMM Kit (KHVP57068) are designed to measure surface temperature and electrical parameters.

03/17/2014


General Tools and Instruments' HVAC Meter Kit (KHV57030) and HVAC DMM Kit (KHVP57068) are designed to measure surface temperature and electrical parameters. Courtesy: General Tools and InstrumentsThe HVAC Meter Kit (KHV57030) and HVAC DMM Kit (KHVP57068) from General Tools and Instruments are ideal for contractors and technicians who routinely measure surface temperature and electrical parameters. The HVAC Meter Kit (KHV57030) includes General's new Rugged TRMS Multimeter with NCV Detection (DMM570) and new 30:1 Ultra Wide-Range IR Thermometer with K Port (IRT730K). The HVAC DMM Kit (KHVP57068) includes the DMM570 and combines it with General's Auto Ranging ac/dc TRMS 400 Amp Clamp Meter (DAMP68). The DAMP68 offers 11 functions over 34 ranges. It measures ac/dc voltage and current, resistance, capacitance, and frequency, and can check continuity and diode integrity. The DAMP68's clamp jaw has a 1.48 in. opening. It can operate in auto or manual ranging mode and has a rugged rubber housing. All readings are displayed on a backlit 3¾-digit (4,000-count) LCD with two digital readouts and a fast-response analog bar graph.

General Tools & Instruments

www.generaltools.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me