How to create productive working relationships

Understanding how to properly communicate with decision-makers is key to a successful building project.


In 1930, a major construction project was started on the island of Manhattan in New York City. It was completed in 1 year and 45 days later, which was ahead of schedule. The reported height of the building to its tip is usually given as 1,250 ft (not including the lightning rod). It took 57,000 tons of steel to construct the steel skeleton. The building has 6,500 windows, more than 100 floors, and at peak times, as many as 3,400 workers at one time. The total cost of this iconic building—the Empire State Building, if you haven’t already guessed—was approximately $24 million. 

The question is how was it possible to complete a project of this magnitude in little over a year? Perfectly issued construction documents? Not likely. Mobile phones? Not in 1930. Internet access? No such thing. It wasn’t around yet.

The answer may lie in an old photograph showing the contractor’s general superintendent next to the project’s structural engineer in the field office as they stood over an inclined work table covered with drawings. It is pretty obvious from the photo they were heavily engaged in conversation rather than just shooting the breeze. This is the first step to a project’s success: communication.

All the technological tools that are available now provide incredible benefits in the construction industry. But getting out in the field and meeting one-on-one with the constructors of a project is vital and invaluable to the project’s success.

Richard D. Miller is a construction-engineering consultant in Las Vegas. His expertise is in the design, construction, and management of projects within private and public sectors.

Improving the line of communication

Consider a scenario with a contractor and consultant. Solving an issue via mobile, text, or email isn’t the best solution—going out to the job site is.

There is no 

good substitute for visiting the site and walking the project with the field engineer, general superintendent, and/or the subcontractor’s project representative and discussing the construction problems that inevitably come up. Interferences, substitutions, the inspector’s notices of correction, and value-engineering options are just a few of the many different matters that are best talked out and viewed in the field.

Here are three tips for fostering a more productive working relationship with the contractor that can contribute to achieving a successful project.

  1. Upon request for input in a matter dealing with field issues, volunteer to visit the site and meet with the contractor’s personnel who are involved with the issue.

  2. Encourage field staffing to offer recommendations to resolve any construction problems. This input may result in a low-cost or no-cost change order.

  3. Reiterate your willingness to visit the site on an as-needed basis and commitment to work with the contractor’s field people to meet the mutual goal of satisfying the owner’s expectations for the project.

Pesky change order requests add dollars to the project and make for an unhappy client. There is a much better chance of reducing the cost or eliminating a change order via a site visit, where you can talk it out and work it out in the field.

Get out in the field, walk through the project, and talk out the issues with those constructing the project. The more communication and collaboration there is with the contractor, the better. By taking the initiative of going onsite and collaborating with everyone involved with the project, you can improve the process and the ultimate outcome.

Richard D. Miller is a construction-engineering consultant in Las Vegas. His expertise is in the design, construction, and management of projects within private and public sectors.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me