How sustainable is an industrial fieldbus infrastructure?

More industrial automation component vendors are offering Ethernet provision as standard on their devices.

03/06/2013


A new study by IMS Research – now part of IHS Inc. – estimates that fieldbus protocols accounted for 75% of new industrial automation component network connections in 2011. This is projected to fall to 69% in 2016. New network connections using fieldbus protocols are still some way ahead that of Ethernet, yet growth of Ethernet connections is expected to be considerably higher to 2016.

More industrial automation component vendors are offering Ethernet provision as standard on their devices. A number of vendors released new products in 2012 which put the emphasis squarely on connectivity via Ethernet technology. As these vendors push the adoption of Ethernet protocols it requires machine builders and end users to switch from older fieldbus technologies.

IHS analyst for industrial Ethernet, fieldbus, and wireless research commented, “While fieldbus solutions offer connection speeds that may be fast enough for certain applications, they do not offer a unified networking approach, such as with Ethernet technologies.” It’s not just unification which is an issue. Simplifying the network can reduce company overheads through an integrated system. This is difficult to achieve with fieldbus technologies. Instead end users will usually have separate office IT divisions and a factory IT divisions. Ethernet adoption across a plant or factory provides a better environment for sharing information and a single division with responsibility for the overall network. The benefits of which are likely to be less downtime and lower overall cost.”

The future still is strong for fieldbus, with new connections still increasing year-on-year.  However, it is undeniable that industrial Ethernet growth will remain higher than that of fieldbus. IHS believes that within 10 to 15 years industrial Ethernet will be the dominant networking technology in industrial environments and almost all components will offer Ethernet connectivity as standard.

Long product lifecycles and conservatism in industry will maintain fieldbus in the near term but eventually it will be relegated to a supporting role. “With the reduction in adoption will likely come an increase in cost also, further fuelling the transition to industrial Ethernet”, said Moore.

“The World Market for Industrial Ethernet and Fieldbus Technologies – 2013 Edition” is now available. This includes extensive analysis of industrial Ethernet and fieldbus technologies.

Source: IMS Research (acquired by IHS, Inc.)

- Edited and posted by Control Engineering, CFE Media; see other automation research results.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me