Hotel Focuses on Lighting Retrofit to Save Energy

10/17/2006


A lighting retrofit in July 2005 involving 7,300 fixtures at the 390-room Baltimore Marriott Hunt Valley Inn made for a summer of delight, not discontent, for the facility’s owner and manager.

The hotel cut wasteful spending on energy for lighting over 50% by replacing outdated incandescent and fluorescent lamps in favor of dimmable, long-life plug-in and screw-in compact fluorescent lamps and high-efficiency T8 linear fluorescent lamps with electronic ballasts.

"We've helped the hotel hit a 50% improvement on kilowatt savings alone," says Richard G. Lubinski, president of Ohio-based energy consulting firm Think Energy Management, LLC. "There's also a tangible reduction in electrical demand peaks (KW), lower maintenance hassles and lower costs whenever long-life lighting products are applied."

Lubinski reports that the six-month performance of the new lighting nets out as a recurring annual savings of 1,250,000 kWh of electricity consumed, compared with the old lighting. Most of the retrofit involves compact fluorescent lamps used for downlighting and general lighting applications in hotel hallways, banquet rooms, conference rooms and guestrooms.

Lubinski's firm collaborated with the lighting manufacturer to develop a self-funding energy-efficiency initiative that not only cuts wasteful spending on energy for lighting, but also delivers lower maintenance costs and better quality lighting throughout the hotel. Thus far, the companies have conducted investment-grade lighting audits and established lighting retrofit standards for 28 properties. As new properties are purchased by the owner, the new energy efficient lighting standard will be applied.

For more information about lighting systems from GE Consumer & Industrial, click here .





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me