Ground fault equipment protection line

The line of UL ground fault equipment protection (GFEP) devices are designed for solutions to help prevent costly production shutdowns due to ac and dc pulsating ground faults, as well as overloads and short circuits.

12/27/2016


The line of UL Ground Fault Equipment Protection (GFEP) devices are designed for solutions to help prevent costly production shutdowns due to AC and DC pulsating ground faults, as well as overloads and short circuits. Courtesy: Altech CorpThe line of UL ground fault equipment protection (GFEP) devices are designed for solutions to help prevent costly production shutdowns due to ac and dc pulsating ground faults, as well as overloads and short circuits. The UL 489 Branch Circuit Breaker with Ground Fault Relay (GFL Series) combines GFEP with a UL 489 Branch Circuit Protector to eliminate the need for upstream circuit protection. The UL 1053 Ground Fault Sensing and Relaying device (GF Series) provides residual current protection for circuits with loads up to 63 A. This device represents a retrofit GFEP where standard overload and short circuit protection is already being provided, or will be provided, by other means. The UL 1077 Ground Fault Relay with Overload Protection (GFR Series) serves as a combined GFR and Supplementary Protector (RCBO).

Altech Corp.

www.altechcorp.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me