Gigabit high-power injector for Power over Ethernet

The INJ-24A Gigabit High Power PoE+ Injector from Moxa transmits 60 watts of power to any PD or PoE device and can easily adapt to different power standards with a DIP switch.

05/09/2013


The INJ-24A Gigabit High Power PoE+ Injector transmits 60 watts of power to any PD or PoE device and can easily adapt to different power standards with a DIP switch. Courtesy: MoxaMoxa's INJ-24A Gigabit High-Power PoE+ Injector transmits data and up to 60 watts of power to any PD or Power over Ethernet device, allowing devices on 10/100/1000 networks to safely operate with twice the power of conventional PoE+. (PoE is Power over Ethernet.)

The INJ-24A can quickly adapt to different power standards. By adjusting a DIP switch, the operator can select different power standard modes and even which wire pairs to deliver power on. This allows the INJ-24A to supply power to nearly any PoE device with minimal compatibility obstacles because it can be quickly reconfigured to match the device's settings.

The INJ-24A is designed to transmit data even with potential hazards like power fluctuations, static electricity, and other sources of electromagnetic interference. Media connections are reinforced with protection against power surges of up to 3 kV, while a heat-efficient housing enables the INJ-24A to operate in extremely cold or hot weather (-40 C to 75 C). The built-in 24/48 V dc booster enables the injector to operate on either 24 V dc or 48 V dc.

Smart PoE LED indicators on the INJ-24A also convey the status at a glance so the system operator can immediately identify whether the PoE port is supplying power, and which power supply mode is currently active.

Moxa

www.moxa.com 

See other Control Engineering industrial network products here and linked below.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me